BeamCutPageParamNames Class

返回用户文档首页

梁切割页包含的属性名称(封装成一个属性组)

Inheritance Hierarchy

SystemObject
LoongCAD.UI.ComponentBeamCutPageParamNames

Namespace: LoongCAD.UI.Component
Assembly: LoongSDKSTC (in LoongSDKSTC.dll) Version: 2025.0.9.8 (2025.0.9.8)

Syntax

Copy

public static class ParamNames

The BeamCutPageParamNames type exposes the following members.

Fields

	Name	Description
	DOWN_X1
	GAP_SUB_BTM_FLANGE_AND_MAIN_PART	次零件下翼缘与主零件之间的间隙。
	GAP_SUB_TOP_FLANGE_AND_MAIN_PART	次零件上翼缘与主零件之间的间隙。
	GAP_SUB_WEB_AND_MAIN_PART	次零件腹板与主零件之间的间隙。
	SELECT_SUB_BTM_FLANGE_CUT	选择是否切割次零件的底翼缘
	SELECT_SUB_BTM_WELD_BACKING_BAR_LENGTH	选择次零件底部衬垫板的长度
	SELECT_SUB_BTM_WELD_BACKING_BARS_POS	选择次零件底部衬垫板的位置
	SELECT_SUB_TOP_BTM_FLANGE_PREPARED	选择准备加工次零件的上翼缘还是下翼缘
	SELECT_SUB_TOP_FLANGE_CUT	选择是否切割次零件的顶翼缘
	SELECT_SUB_TOP_WELD_BACKING_BAR_LENGTH	选择次零件顶部衬垫板的长度
	SELECT_SUB_TOP_WELD_BACKING_BARS_POS	选择次零件顶部衬垫板的位置
	SELECT_WELD_BACKING_BAR_WELDS_MADE_TYPE	选择是否衬垫板的装配类型
	SUB_BTM_FLANGE_VERTICAL_OFFSET	次零件下翼缘的切割体，额外的水平偏移
	SUB_BTM_WELD_BACKING_BAR_LENGTH	次零件底部衬垫板的长度值
	SUB_BTM_WELD_BACKING_OFFSET	次零件底部衬垫板的偏移
	SUB_TOP_FLANGE_VERTICAL_OFFSET	次零件上翼缘的切割体，额外的水平偏移
	SUB_TOP_WELD_BACKING_BAR_LENGTH	次零件顶部衬垫板的长度值
	SUB_TOP_WELD_BACKING_OFFSET	次零件顶部衬垫板的偏移
	UP_X1
	WELD_ACCESS_HOLES_BTM_HORIZONTAL_DIMENSIONS	底部连接口的水平尺寸
	WELD_ACCESS_HOLES_BTM_PREP_DIST	焊接孔下侧准备长度x
	WELD_ACCESS_HOLES_BTM_VERTICAL_DIMENSIONS	底部焊接孔的垂直尺寸
	WELD_ACCESS_HOLES_LARGE_RADIUS	焊接孔的大半径
	WELD_ACCESS_HOLES_SELECT_SHAPE	焊接孔的形状
	WELD_ACCESS_HOLES_SMALL_RADIUS	焊接孔的小半径
	WELD_ACCESS_HOLES_TOP_HORIZONTAL_DIMENSIONS	顶部焊接孔的水平尺寸
	WELD_ACCESS_HOLES_TOP_PREP_DIST	焊接孔上侧准备长度x
	WELD_ACCESS_HOLES_TOP_VERTICAL_DIMENSIONS	顶部焊接孔的垂直尺寸
	WELD_BACKING_BAR_PRO	衬垫板的板属性

Top

Reference

LoongCAD.UI.Component Namespace

BeamCutPageParamNames Class

Reference

返回首页