Bolt |
环形螺栓组
Inheritance HierarchySystemObject
LoongCAD.STC.Friendly.SceneModelObject
LoongCAD.STC.Friendly.SceneTFObject
LoongCAD.STC.Friendly.SceneBoltGroup
LoongCAD.STC.Friendly.SceneBoltCircle
LoongCAD.STC.Friendly.SceneModelObject
LoongCAD.STC.Friendly.SceneTFObject
LoongCAD.STC.Friendly.SceneBoltGroup
LoongCAD.STC.Friendly.SceneBoltCircle
Namespace: LoongCAD.STC.Friendly.Scene
Assembly: LoongCAD.STC.Friendly (in LoongCAD.STC.Friendly.dll) Version: 2025.0.9.17 (2025.0.9.17)
SyntaxC#
public sealed class BoltCircle : BoltGroup
The BoltCircle type exposes the following members.
Constructors| Name | Description | |
|---|---|---|
 | BoltCircle | Initializes a new instance of the BoltCircle class |
Properties| Name | Description | |
|---|---|---|
 | ArrayDistX |
阵列的X方向间隔
(Inherited from BoltGroup) |
| ArrayDistY |
阵列的Y方向间隔
(Inherited from BoltGroup) |
| Bolt |
是螺栓还是一个纯孔洞
(Inherited from BoltGroup) |
| BoltPositions |
螺栓位置
(Inherited from BoltGroup) |
| BoltSize |
螺栓尺寸
(Inherited from BoltGroup) |
| BoltStandard |
螺栓标准
(Inherited from BoltGroup) |
| BoltType |
工厂/工地
(Inherited from BoltGroup) |
| CircleBoltCount |
环形布局的螺栓数量
(Inherited from BoltGroup) |
| CircleDiameter |
环形布局的直径
(Inherited from BoltGroup) |
| ConnectAssemblies |
是否连接构件
(Inherited from BoltGroup) |
| CutLength |
切割长度
(Inherited from BoltGroup) |
| Diameter | 环形直径 |
| Enabled |
对象是否启用
(Inherited from ModelObject) |
| EndPointOffset |
末尾偏移
(Inherited from BoltGroup) |
| ExtraLength |
附加长度
(Inherited from BoltGroup) |
| FirstPosition |
第一参考点
(Inherited from BoltGroup) |
| Guid |
对象GUID
(Inherited from ModelObject) |
| Hole1 |
孔1是否开槽
(Inherited from BoltGroup) |
| Hole2 |
孔2是否开槽
(Inherited from BoltGroup) |
| Hole3 |
孔3是否开槽
(Inherited from BoltGroup) |
| Hole4 |
孔4是否开槽
(Inherited from BoltGroup) |
| Hole5 |
孔5是否开槽
(Inherited from BoltGroup) |
| HoleType |
孔类型
(Inherited from BoltGroup) |
| Id |
同Identifier, 缩写
(Inherited from ModelObject) |
| Identifier |
对象ID
(Inherited from ModelObject) |
| IgnoreBoltIndices |
忽略螺栓的索引
(Inherited from BoltGroup) |
| Label |
对象标签, 标签用于插件中识别每次刷新修改的物体
(Inherited from ModelObject) |
| Length |
剪力钉长度
(Inherited from BoltGroup) |
| ListDistX |
XYList布局的X方向间隔
(Inherited from BoltGroup) |
| ListDistY |
XYList布局的Y方向间隔
(Inherited from BoltGroup) |
| Locked |
对象是否锁定
(Inherited from ModelObject) |
| NumberOfBolts | 螺栓数量 |
| Nut1 |
螺母1是否启用
(Inherited from BoltGroup) |
| Nut2 |
螺母2是否启用
(Inherited from BoltGroup) |
| OtherPartsToBolt |
其它次零件
(Inherited from BoltGroup) |
| Parent |
父对象
(Inherited from ModelObject) |
| PartToBeBolted |
第一次零件
(Inherited from BoltGroup) |
| PartToBoltTo |
主零件
(Inherited from BoltGroup) |
| Phase |
阶段号
(Inherited from ModelObject) |
| Position |
螺栓组方位信息
(Inherited from BoltGroup) |
| RadialAngle |
径向布局的角度
(Inherited from BoltGroup) |
| RadialBoltCount |
径向布局的螺栓数量
(Inherited from BoltGroup) |
| RadialDiameter |
径向布局的直径
(Inherited from BoltGroup) |
| RadialStrideX |
径向布局的X方向间隔
(Inherited from BoltGroup) |
| RotateSlots |
槽口旋转
(Inherited from BoltGroup) |
| Scene |
此对象所在的场景
(Inherited from ModelObject) |
| SecondPosition |
第二参考点
(Inherited from BoltGroup) |
| Shape | 螺栓布局 |
| SlottedHoleX |
X方向槽口长度
(Inherited from BoltGroup) |
| SlottedHoleY |
Y方向槽口长度
(Inherited from BoltGroup) |
| StartPointOffset |
起始偏移
(Inherited from BoltGroup) |
| ThreadedRodA |
化学螺栓参数A
(Inherited from BoltGroup) |
| ThreadedRodEmb |
化学螺栓参数Emb
(Inherited from BoltGroup) |
| ThreadedRodG |
化学螺栓参数G
(Inherited from BoltGroup) |
| ThreadInMaterial |
孔内是否允许有螺纹
(Inherited from BoltGroup) |
| Tolerance |
孔冗余量
(Inherited from BoltGroup) |
| Type |
核心对象类型
(Inherited from ModelObject) |
| Washer1 |
上垫片是否启用
(Inherited from BoltGroup) |
| Washer2 |
第一下垫片是否启用
(Inherited from BoltGroup) |
| Washer3 |
第二下垫片是否启用
(Inherited from BoltGroup) |
MethodsTop
See Also