BoltArray Class

阵列螺栓组

Inheritance Hierarchy

SystemObject
  LoongCAD.STC.Friendly.SceneModelObject
    LoongCAD.STC.Friendly.SceneTFObject
      LoongCAD.STC.Friendly.SceneBoltGroup
        LoongCAD.STC.Friendly.SceneBoltArray

Namespace: LoongCAD.STC.Friendly.Scene
Assembly: LoongSDKSTC (in LoongSDKSTC.dll) Version: 2025.0.9.8 (2025.0.9.8)

Syntax

Copy

public sealed class BoltArray : BoltGroup

The BoltArray type exposes the following members.

Constructors

	Name	Description
	BoltArray	Initializes a new instance of the BoltArray class

Top

Properties

	Name	Description
	ArrayDistX	阵列的X方向间隔 (Inherited from BoltGroup)
	ArrayDistY	阵列的Y方向间隔 (Inherited from BoltGroup)
	BoltPositions	螺栓位置 (Inherited from BoltGroup)
	BoltSize	螺栓尺寸 (Inherited from BoltGroup)
	BoltStandard	螺栓标准 (Inherited from BoltGroup)
	BoltType	工厂/工地 (Inherited from BoltGroup)
	CircleBoltCount	环形布局的螺栓数量 (Inherited from BoltGroup)
	CircleDiameter	环形布局的直径 (Inherited from BoltGroup)
	ConnectAssemblies	是否连接构件 (Inherited from BoltGroup)
	CutLength	切割长度 (Inherited from BoltGroup)
	Enabled	对象是否启用 (Inherited from ModelObject)
	EndPointOffset	末尾偏移 (Inherited from BoltGroup)
	ExtraLength	附加长度 (Inherited from BoltGroup)
	FirstPosition	第一参考点 (Inherited from BoltGroup)
	Guid	对象GUID (Inherited from ModelObject)
	Hole1	孔1是否开槽 (Inherited from BoltGroup)
	Hole2	孔2是否开槽 (Inherited from BoltGroup)
	Hole3	孔3是否开槽 (Inherited from BoltGroup)
	Hole4	孔4是否开槽 (Inherited from BoltGroup)
	Hole5	孔5是否开槽 (Inherited from BoltGroup)
	HoleType	孔类型 (Inherited from BoltGroup)
	Id	同Identifier, 缩写 (Inherited from ModelObject)
	Identifier	对象ID (Inherited from ModelObject)
	IgnoreBoltIndices	忽略螺栓的索引 (Inherited from BoltGroup)
	Label	对象标签, 标签用于插件中识别每次刷新修改的物体 (Inherited from ModelObject)
	Length	剪力钉长度 (Inherited from BoltGroup)
	ListDistX	XYList布局的X方向间隔 (Inherited from BoltGroup)
	ListDistY	XYList布局的Y方向间隔 (Inherited from BoltGroup)
	Locked	对象是否锁定 (Inherited from ModelObject)
	Nut1	螺母1是否启用 (Inherited from BoltGroup)
	Nut2	螺母2是否启用 (Inherited from BoltGroup)
	OtherPartsToBolt	其它次零件 (Inherited from BoltGroup)
	Parent	父对象 (Inherited from ModelObject)
	PartToBeBolted	第一次零件 (Inherited from BoltGroup)
	PartToBoltTo	主零件 (Inherited from BoltGroup)
	Phase	阶段号 (Inherited from ModelObject)
	Position	螺栓组方位信息 (Inherited from BoltGroup)
	RadialAngle	径向布局的角度 (Inherited from BoltGroup)
	RadialBoltCount	径向布局的螺栓数量 (Inherited from BoltGroup)
	RadialDiameter	径向布局的直径 (Inherited from BoltGroup)
	RadialStrideX	径向布局的X方向间隔 (Inherited from BoltGroup)
	RotateSlots	槽口旋转 (Inherited from BoltGroup)
	Scene	此对象所在的场景 (Inherited from ModelObject)
	SecondPosition	第二参考点 (Inherited from BoltGroup)
	Shape	螺栓布局
	SlottedHoleX	X方向槽口长度 (Inherited from BoltGroup)
	SlottedHoleY	Y方向槽口长度 (Inherited from BoltGroup)
	StartPointOffset	起始偏移 (Inherited from BoltGroup)
	ThreadedRodA	化学螺栓参数A (Inherited from BoltGroup)
	ThreadedRodEmb	化学螺栓参数Emb (Inherited from BoltGroup)
	ThreadedRodG	化学螺栓参数G (Inherited from BoltGroup)
	ThreadInMaterial	孔内是否允许有螺纹 (Inherited from BoltGroup)
	Tolerance	孔冗余量 (Inherited from BoltGroup)
	Type	核心对象类型 (Inherited from ModelObject)
	UserAttributes	用户属性 (Inherited from BoltGroup)
	Washer1	上垫片是否启用 (Inherited from BoltGroup)
	Washer2	第一下垫片是否启用 (Inherited from BoltGroup)
	Washer3	第二下垫片是否启用 (Inherited from BoltGroup)

Top

Methods

	Name	Description
	AddBoltDistX	添加X方向间隔
	AddBoltDistY	添加Y方向间隔
	AddOtherPartToBolt	添加零件到其它次零件 (Inherited from BoltGroup)
	Delete	从场景删除对象 (Inherited from ModelObject)
	GetBoltDistX	获得X方向指定位置间隔距离
	GetBoltDistXCount	获得X方向距离个数
	GetBoltDistY	获得Y方向指定位置间隔距离
	GetBoltDistYCount	获得Y方向距离个数
	GetBoundingBox	获取对象在世界空间的包围盒 (Inherited from ModelObject)
	GetCoordinateSystem	获取对象在场景空间的坐标系 (Inherited from ModelObject)
	GetLabel	获取对象标签, 标签用于插件中识别每次刷新修改的物体 (Inherited from ModelObject)
	GetOtherPartsToBolt	(Inherited from BoltGroup)
	GetPhase	获取阶段号 (Inherited from ModelObject)
	GetReportProperty(String, Point)	获取此对象的报告属性(点类型) (Inherited from ModelObject)
	GetReportProperty(String, Vector)	获取此对象的报告属性(向量类型) (Inherited from ModelObject)
	GetReportProperty(String, Double)	获取此对象的报告属性(双精度浮点类型) (Inherited from ModelObject)
	GetReportProperty(String, Int32)	获取此对象的报告属性(32位整型类型) (Inherited from ModelObject)
	GetReportProperty(String, Int64)	获取此对象的报告属性(64位整型类型) (Inherited from ModelObject)
	GetReportProperty(String, String)	获取此对象的报告属性(字符串类型) (Inherited from ModelObject)
	Insert	(Inherited from TFObject)
	Modify	(Inherited from TFObject)
	Refresh	(Inherited from TFObject)
	RemoveBoltDistX	移除X方向间隔
	RemoveBoltDistY	移除Y方向间隔
	RemoveOtherPartToBolt	从其它次零件中移除指定零件 (Inherited from BoltGroup)
	Select	同Sync, 将场景中数据同步到对象 (Inherited from ModelObject)
	SetBoltDistX	设置X方向指定位置间隔距离
	SetBoltDistY	设置Y方向指定位置间隔距离
	SetLabel	设置对象标签, 标签用于插件中识别每次刷新修改的物体 (Inherited from ModelObject)
	SetPhase	设置阶段号 (Inherited from ModelObject)
	Sync	(Inherited from TFObject)

Top

Reference

LoongCAD.STC.Friendly.Scene Namespace

BoltArray Class

Reference

返回首页