Dialog |
Namespace: LoongCAD.STC.Friendly.Dialog
Assembly: LoongCAD.STC.Friendly (in LoongCAD.STC.Friendly.dll) Version: 2025.0.9.12 (2025.0.9.12)
SyntaxC#
public enum DialogUnitTypeEnum
Members| Member name | Value | Description |
|---|---|---|
| IN_NONE | 0 | |
| IN_BOOLEAN | 1 | |
| IN_INTEGER | 2 | |
| IN_STRING | 3 | |
| IN_RATIO_UNIT | 4 | |
| IN_STRAIN_UNIT | 5 | |
| IN_ANGLE_UNIT | 6 | |
| OUT_ANGLE_UNIT | 7 | |
| IN_LENGTH_UNIT | 8 | |
| OUT_LENGTH_UNIT | 9 | |
| IN_DIMENSION_UNIT | 10 | |
| IN_AREA_UNIT | 11 | |
| IN_VOLUME_UNIT | 12 | |
| IN_WEIGHT_UNIT | 13 | |
| OUT_WEIGHT_UNIT | 14 | |
| IN_DATE_UNIT | 15 | |
| IN_DATE_TIME_MINUTE_UNIT | 16 | |
| IN_DATE_TIME_SECOND_UNIT | 17 | |
| IN_SECTION_ANGLE_UNIT | 18 | |
| IN_DEFORMATION_UNIT | 19 | |
| OUT_DEFORMATION_UNIT | 20 | |
| IN_RADIUS_OF_INERTIA_UNIT | 21 | |
| OUT_REINFAREA_UNIT | 22 | |
| OUT_TRANSVREINF_UNIT | 23 | |
| IN_AREA_PER_LENGTH_UNIT | 24 | |
| OUT_VOLUME_UNIT | 25 | |
| IN_SECTION_MODULUS_UNIT | 26 | |
| IN_MOMENT_OF_INERTIA_UNIT | 27 | |
| IN_TORSION_CONSTANT_UNIT | 28 | |
| IN_WARPING_CONSTANT_UNIT | 29 | |
| IN_FORCE_UNIT | 30 | |
| OUT_FORCE_UNIT | 31 | |
| IN_DISTRIB_LOAD_UNIT | 32 | |
| OUT_DISTRIB_LOAD_UNIT | 33 | |
| IN_SPRING_CONSTANT_UNIT | 34 | |
| IN_ROT_SPRING_CONSTANT_UNIT | 35 | |
| OUT_MASS_PER_LENGTH_UNIT | 36 | |
| IN_SURFACE_LOAD_UNIT | 37 | |
| OUT_SURFACE_LOAD_UNIT | 38 | |
| IN_STRENGTH_UNIT | 39 | |
| OUT_STRESS_UNIT | 40 | |
| IN_MODULUS_UNIT | 41 | |
| IN_DENSITY_UNIT | 42 | |
| IN_MOMENT_UNIT | 43 | |
| OUT_MOMENT_UNIT | 44 | |
| IN_DISTRIB_MOMENT_UNIT | 45 | |
| IN_TEMPERATURE_UNIT | 46 | |
| OUT_TEMPERATURE_UNIT | 47 | |
| IN_THERMDILAT_COEFF_UNIT | 48 | |
| IN_FACTOR_UNIT | 49 | |
| IN_LENGTH_FRACTIONAL_IMPERIAL | 50 | |
| IN_DEFORMATION_FRACTIONAL_IMPERIAL | 51 | |
| IN_DIMENSION_FRACTIONAL_IMPERIAL | 52 | |
| IN_RADIUS_OF_INERTIA_FRACTIONAL_IMPERIAL | 53 | |
| OUT_LENGTH_FRACTIONAL_IMPERIAL | 54 | |
| OUT_DEFORMATION_FRACTIONAL_IMPERIAL | 55 |
See Also